1. JV33 JV5 ink damper acts as an exceptional damper for Mimaki JV5 / JV33 / CJV30 / TS3 / TS5 / TS500 / TPC-1000 printers. It is specifically designed to work with the printhead to ensure smooth and consistent ink flow and high-quality printing.

2. It is capable of removing any air in the ink before it reaches the print head to provide excellent protection from air bubbles and ink clogs, avoiding a break in the flow of ink when it goes through and a drop out of ink when printing. Moreover, ink leakage can be prevented by this ink damper to maintain a smooth printing process without any issues.

3. It is compatible with various kinds of printers, meeting your exceptional requirements. It can be used with both dye and pigment-based inks, making it suitable for both photography and graphic design.
The new JV33 JV5 ink damper is easy to install and remove and fits with the i3200 printhead seamlessly based on its compact design.

4. It is able to keep the pressure stable. During printing, there are lots of left and right movements, which will cause changes to the pressure of the ink inside the tubes feeding to the print head. If the pressure drops, it would cause starvation to the print head and the ink will be dropped out on and off; if the pressure rises, the ink could drip. However, this damper can keep the pressure stable even if there is too much or too little amount of ink feeding into the printhead.

5. The fine mesh screen in it plays a filtering role. It is able to remove any small particles in the ink from going into the print head to reduce the risk of clogs and other ink-related issues, prolonging the use life of the printhead and improving the printing quality.

6. The black material it uses is capable of preventing the ultraviolet rays effectively, which plays an important role for printers using UV-curing ink. So the ink does not harden inside it.