Introduction to the mainboard: The UV flatbed printer mainboard is like the human "brain", controlling the operation of each equipment component. Through the set program, each instruction is issued to make the machine work orderly. Generally, a better mainboard design has the advantages of high color accuracy, exquisite pictures, and a low error rate.
Epson XP600 Double Head Board Kit
The circuit system design is simple and effective, can delay the aging time of wires, has good heat dissipation, and is not likely to cause board burnout.
The mainboard is the "brain" of the entire UV flatbed printer. In daily use, do not allow moisture, liquid, etc. to drip in. Corresponding ground wires must also be installed as needed to avoid short circuits and burnout.
Printer MainBoard Performance Analysis
At present, the XB board and YB board of UV flatbed printers use optical fiber line interfaces. In this process, the transmission efficiency is far greater than that of the USB interface. The interface of the YB board belongs to the round-head optical fiber cable, and the XB board belongs to the square-head optical fiber cable. The main chip used in the high-quality printer main board is a military-grade chip, which is generally difficult to buy on the market. In terms of the stable performance of the board Medium service life is guaranteed.
Under normal circumstances, unless affected by external forces (man-made, unstable voltage and current) and other factors, the service life of the printer mainboard is about 2 years, and it can reach 3 years with good maintenance. The mainboard belongs to the after-sales service of UV flatbed printers. When a fault occurs, the manufacturer will generally provide repair and update services.
The price of UV flatbed printer boards ranges from a few thousand to tens of thousands or hundreds of thousands, mainly depending on the level and number of printheads on the corresponding equipment, plus the technical level. The more printheads there are and the higher the printhead level, the more expensive the printer mainboard will be. On the contrary, the price of the board is cheaper. It should be noted that although the UV flatbed printer is simple to operate and is almost entirely operated by computer software, it cannot be operated carelessly because the UV flatbed printer is a large machine with sophisticated internal systems. If the operation is not standardized, the keys may be pressed multiple times, or operating multiple functions continuously will cause the machine to be unable to respond or even crash. At this time, the printheads are in a continuous working state, which will reduce the performance of the printheads.
Therefore, before operating a UV flatbed printer, you need to receive professional and standardized operating training from the UV flatbed printer manufacturer. Pay attention to the utilization of every part when using it. Otherwise, non-standard operations may cause irreparable losses.
